Parts list for USBPIC Board

Digikey Part Number        Description                  ~Price USD
-------------------------------------------------------------------
 PIC Controller:
PIC18F2455-I/SO-ND  IC PIC MCU FLASH 8KX16 28SOIC          5.50
Alternate PICs:
PIC18F2450-I/SO-ND  IC PIC MCU FLASH 8KX16 28SOIC          5.10
PIC18F2553-I/SO-ND  IC PIC MCU FLASH 16KX16 28SOIC         9.73

 OpAmp:
296-1313-1-ND       IC TLC274 OP AMP 14-SOIC               0.75
Alternate OpAmps:
296-9540-1-ND       IC LM324ADR, general purpose           0.41
AD8608ARZ-ND        IC AD8608, rail-to-rail                5.88

 Misc:
X909-ND             CERAMIC RESONATOR 20.00MHZ WCAP (xtal) 0.54
A19433-ND           CONN HEADER VERT 6POS .100 (ICSP conn) 0.32
AE9925-ND           CONN USB FEMALE TYPE B PCB (USB conn)  1.09

 Also need:
                    5v Regulator: 7805 TO220 or 78L05, LM340L-05 TO-92
                    filter, tantalum, and ceramic bypass capacitors
                    10K 1/6w reset pullup resistor
                    1K 1/6w LED resistor
                    LED indicator
                    16 pin .1" male I/O headers (optional)
HSC16H-ND           CONN SOCKET IDC 16POS (I/O cable conn) 0.55


                            Output options

    ----------------------- TRANS board ---------------------------
 TO220 N-channel Enhanced (aka Logic Level Gate) FETs:
IRLZ14PBF-ND        IRLZ14PBF (e.g., 60v 10A FET)
                    Clamp diodes for inductive loads
                    6POS .156 molex male header (optional)
A31300-ND           CONN RECEPT 6POS 18AWG (cable conn)    0.57
A31394CT-ND         CONN SOCKET 18-24AWG SL156 (contacts)  0.06

    
    ----------------------- MATRIX board --------------------------
620-1121-ND         UDN2982 DRIVER 8CHAN 18-DIP (pull-up)  2.13
                        (note: no longer available in DIP package)
497-2356-5-ND       ULN2803 DRIVER 8CHAN 18-DIP (pull-down)0.93
HSC20H-ND           CONN SOCKET IDC 20POS (I/O cable)      0.55
                    20 pin .1" male header (optional)
                    18 pin DIP sockets (optional)


    ----------------------- HBSW board ----------------------------
497-1395-5-ND       L298N H-Bridge driver
WHAR10FECT-ND       RES .10 OHM 1/2W 1% WW AXIAL (current sense)
 TO220 N-channel Enhanced (aka Logic Level Gate) FETs:
IRLZ14PBF-ND        IRLZ14PBF (e.g., 60v 10A FET)
                    Clamp diodes for inductive loads


    --------------- 1/6W resistors for OpAmp config ---------------
RS112-ND            KIT RES 1.0-1.0M 1/6W 73 VALUES       16.96
1.0KEBK-ND          RES 1.0K OHM 1/6W 5% CARBON FILM       0.058
4.7KEBK-ND          RES 4.7K OHM 1/6W 5% CARBON FILM       0.058
10KEBK-ND           RES 10K OHM 1/6W 5% CARBON FILM        0.058
47KEBK-ND           RES 47K OHM 1/6W 5% CARBON FILM        0.058
100KEBK-ND          RES 100K OHM 1/6W 5% CARBON FILM       0.058
470KEBK-ND          RES 470K OHM 1/6W 5% CARBON FILM       0.058
1.0MEBK-ND          RES 1.0M OHM 1/6W 5% CARBON FILM       0.058
2.2MEBK-ND          RES 2.2M OHM 1/6W 5% CARBON FILM       0.058
3.3MEBK-ND          RES 3.3M OHM 1/6W 5% CARBON FILM       0.058

    ---------------- capacitors for OpAmp config -------------------
                    ...your choice...


    ----------------- Programmer and connector ---------------------
PG164120-ND         PROGRAMMER MCU PICKIT 2               34.99
A99617-ND           CONN RCPT HSNG 6POS CST-100 II         0.39
                      (note: need contacts for connector ...???...)
                    6 pin .1" male header and ribbon cable